$3.50 - $4.00 / sq. ft.
Please select you banner length and height.
Grommets reinforce the area around a hook, bungee cord or rope. They are highly recommended. We suggest a least one on each corner. Banners wider than 48″ should be reinforced every two feet. We also recommend multiples of 2.
For eye popping color, we recommend gloss. But if you are concerned about too much reflection, matte is the choice for you.
IMPORTANT!! Most banners will be fine with a flush cut and this is our standard finish does not increase the cost of the banner. Vinyl Scrim material will not fray, but edge sealing or sewing adds a very nice touch, adds durability especially in windy conditions.
VERY IMPORTANT!!! Please enter the total square feet value that was calculated when you entered the length and height dimension (above). Example: 6′ x 2″ = 12 square feet. Enter 12 in the finishing field. We apologize and are working on a fix.
Rod pockets come in handy at the top of your banner so you can hang or hold from the top by placing a dow rod in it.
Rod Pocket Top (+$15.00)
Rod Pocket Bottom (+$15.00)
If you are going to hang your banner in an extremely windy area, we do suggest wind holes (a half moon cut approximately 6″ wide). The larger the banner, the more wind holes you will need. We suggest one every two feet. Wind holes are not necessary if you are hanging your banner on a wall.
Upload your art file here. Please create files at 100%. Remember, the higher the resolution, the better the quality. Anything lower that 150 dpi is considered low resolution and could result in poor image quality.
We accept PDF, JPG, TIF, EPS, AND PSD. If you have a file format not listed, give us a call — 419.447.6523.
(max file size 128 MB)
When you need a banner that’s a little thicker, than 15 oz. is for you.
There are no reviews yet.
Your review *
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Powered by WordPress. Designed by